EAFA-27-649 Ni Conductron® is a solvent reducible nickel conductive coating. It was formulated to provide Electro Magnetic Interference and Radio Frequency Interference (EMI/RFI) shielding properties.

This product provides excellent conductivity at moderate film thickness along with good mar resistance and adhesion to many plastic and plastic blends used in the electronics industry.

Performance Properties:

Resistance @
1 mil: 0.5 to 1.0 ohms/sq.
Gloss: Flat
Adhesion: Good to Excellent
Mar resistance: Excellent

Application:

Apply: Spray; HVLP, Air, Air Assisted Airless, etc.
Reduction: As required
Reducer: TS-125
Substrate: Plastic
Wet Film: 6 - 12 mils (2 passes may be required)
Dry Film: 1.0 - 2.0 mils

Specifications:

VOC: 6.03 lbs/gal
Viscosity: 19" - 23"sec
Viscometer: #3 Zahn cup
Weight/gal: 10.70 - 10.90
Flash Point: 54° F TCC
Solids by wt: 43.6 - 45.6%
Solids by vol: 16.0 - 18.0%
Coverage @ 1 mil: 271 ft²
100% efficiency

Cure Rate:

Air Dry: 10 to 20 minutes @ 77° F
Bake: After 15 min of air dry,
force for 15 min @ 160° F

The above technical data is accurate to the best of our knowledge. No warranty is expressed or implied as application methods and conditions and intended use is beyond our control.